Smaart V8 Software Program And. Getting started with Smaart v8 demands some basic hardware requirements beyond the Smaart software program and host computer. At the minimum amount, for electro-acoustic techniques (PA system evaluation), a 22 audio gadget interface and a individual measurement microphone will be sufficient. Rational Acoustics Smaart is a dual-channel, FFT-based acoustical analysis software application that runs on Microsoft Windows and Mac OS X. It provides real-time spectrum analysis of audio signals, dual channel transfer function analysis of sound system response and acoustical impulse response measurement and analysis capability.
Smaart v8 is the Industry Leading, Dual Platform (Mac & PC), FFT-Based Audio Analysis Software.
Smaart is a computer based dual-channel FFT platform that we use in our work as audio engineers to view the frequency content of signals or measure the response of our electrical and electro-acoustic systems, all to better make informed decisions about the deployment and operation of those systems. Getting started with Smaart v8 requires some basic hardware requirements beyond the Smaart software and host computer. At the minimum, for electro-acoustic systems (PA system analysis), a 2×2 audio device interface and a single measurement microphone will suffice. This is however only the beginning, as Smaart is purpose-built to scale up to fit the requirements of even the most complex systems and environments. The only practical limitation of Smaart is your own – be it expanding your hardware universe, or improving your knowledge through practice and training.
Real-Time Mode: Spectrum Engine
Configure as many single-channel engines as you need, each with the ability to produce its own RTA and Spectrograph data.
Fractional-Octave banding, up to 1/48th octave resolution
Multi-Channel input allows for simultaneous display of multiple individual RTAs – as well as “live averages” from one or many inputs.
“Line-Over-Bands” view of RTA displays both raw and banded data
Show Peak-Holds, Target Curves, display THD & calibrated plots
FIFO and Integrating Averaging
Spectrum-over-Time with amplitude represented by color.
Real-Time adjustable dynamic range
Scrollable 1000+ line history
Full Color, or Black & White display
Real-Time Mode: Transfer Function (Frequency Response)
Phase, Magnitude and Coherence Plots.
Virtually unlimited simultaneous live TF engines, even from multiple interfaces. (Multi-Device Transfer Function engines require sample-clock sync)
MTW (Multi-Time-Window) FFT provides better than 48th octave resolution from 60Hz up and 1Hz resolution up to 140 Hz.
Up to 1/48th octave smoothing for both Phase and Magnitude plot displays
Coherence weighted live or stored data averaging.
Delay Tracking automatically measures and adjusts
TF delay for every measurement cycle.
FIFO and Integrating Averaging
Smaart V8 Price
Window centered at the TF’s delay
User-selectable FFT size up to 32k
FIFO averaging up to 16 FIFO
Display data Linearly, Logarithmically, or as ETC (Envelope Time Curve)
More here: https://www.rationalacoustics.com/smaart/smaart-v8/
Download Rational Acoustics Smaart v184.108.40.206 full
Download Rational Acoustics Smaart v220.127.116.11 windows
Download Rational Acoustics Smaart v18.104.22.168 macOS
password extract file: 2020
Smaart V8 License Code
install Smaart v8
see the readme file
Activation code: Contact us
Chat or facebook: https://www.facebook.com/1software.link
Check links: 20/05/2021 All links are alive! Smaart v8 is the most powerful, flexible and adaptable version of Smaart to date. From studio to stadium, shop to show, Smaart v8 fits the needs of any measurement situation. With Smaart v8, we are breaking out of the single window, fixed GUI world to allow increased control over your software environment, allowing you to adapt and expand Smaart to better match your specific applications. Smaart v8 offers new ways to manage your data and your measurement environment, new multi-window capability, a new tab-based interface, added functionality for use on tablets and touch screen computers, computer-to-computer API capability and much, much more. Easier, More Intuitive Measurement Configuration The measurement configuration process has been updated to provide an easier, more intuitive workflow – adding automatic measurement creation and management functionality to streamline configuration and support a “build-on-the-fly” process that is often an operational necessity.
Specifically: - New program workflow takes you through device selection/configuration and automatically creates Spectrum measurements - Device and measurement configuration is managed through a single window - Input metering right in the I-O Config, check your inputs before you even create measurements - Creating a Transfer Function measurement now automatically creates the accompanying Spectrum contributors to it. - Measurement creation on-the-fly from the main interface Tab-Based Interface Many users expressed a desire for a tab-based interface where one could configure and switch between multiple workspaces, so we have expanded the basic “measurement group” paradigm from v7 and now organize our configurations into tabs which include not only the configured measurements, but also the layout and plot view as well. Multi-Window Capability We have added the ability to drive multiple windows, each containing its own set of tabbed workspaces. It is like being able to run multiple sessions of Smaart simultaneously. Hide/Show Interface Controls We heard from many users that they really liked the hide/show data bar feature available in Smaart v.7 Di because it gave them the ability to maximize the plot area, especially during show time. So we took that concept a step further in v8 and applied it to all interface control elements Command Bar The increased use of Smaart on tablet/touch screen computers complicated using Hot-Key commands. To address this, we added a command menu and a user-configurable command bar of large, touch-friendly buttons that can be used to call any of Smaart’s keyboard-based, Hot-key commands. Improved Data Storage & APL For static data, we have overhauled the trace storage process to allow for better direct access to your larger file structure of captured traces, without cluttering up active memory space trying to keep everything loaded in RAM in case you need it. The new Active Plot Legend, or APL, window details the contents of the active/selected plot, showing the names, colors and trace offsets of Live and static data traces – as well as providing the controls for hiding/showing the traces. Broadband Metering A long-time user requested feature is the ability to continuously view input signal levels, as well as monitor parameters such as SPL and LEQ for multiple inputs simultaneously. For this we created the Broadband Meters window. This mode-less window can be configured to monitor any of Smaart’s input signals via a simple grid configuration process. Integrated Smaart I-O Control Control for the Smaart I-O gain and phantom power are now integrated directly into the Smaart v8 interface. Smaart-to-Smaart API Smaart’s integrated API allows any copy of Smaart v8 to act as a host to any other copy of Smaart v8, meaning you can create a rig with one computer acquiring the input signals and performing the measurement computations, while another acts as a client and remotely accesses the measurement data. This capability then allows your v8 measurement environment to be spread, not just across multiple monitors, but across multiple computers. Home page CLiCK HERE FOR DOWNLOAD