Ecu Map Editor Software

Posted By admin On 04/09/21

This post contains all the information you need to easily edit maps using ECM Titanium software, starting with the reading procedure of file stored in the electronic engine control unit (ECU) and ending with the writing procedure of modified inside ECU.

EcuBooster is an universal editor for ECU tuning. Powerful and convenient tool for editing ECU maps and parameters. Auto-detecting type of bin-file. EcuBooster editor automatically detects a type of ECU when you open a bin file. And loads editable maps and options. Activation of licenses directly in the application.

TOAD ECU Map Editing Software: Enlarge. It may be overwhelming at first. But an hour or two and you'll ge the hang of it. Basically all you are. It’s designed for editing ecu maps from the Bosch EDC15 for VAG group turbo diesels. That means free Audi remaps, free Volkswagen remaps, free Skoda remaps, and free Seat remaps. All you have to do is learn! After you have downloaded the bin file from your car’s ECU the software will load and search for multiple maps.

Ecu Editor Free

The document is sorted into eight parts:

Each part of this document describes in detail all the steps you need to understand before proceeding with the following part.

To simplify the explanation will be described only the tools developed by Alientech Srl.

Part 1 – Reading original files

Generally you need a tool to read the file stored inside the memory of engine control unit.

Alientech produces and trades the following devices:

  • Galep, EPROM programmer.
  • Kess, generic serial programmer.
  • Powergate, specific serial programmer.
  • BDMpro, lettore for comunicazione con microcontrollore.

The reading can be achieved in three ways:

  • By unsoldering the memory chip (EPROM) and reading the data stored.
  • By connecting a tool for serial reading to the diagnosis connector (OBD2).
  • By connecting a tool for reading data from the microcontroller.

In the first case you need also the equipment for welding/unsoldering memory chip on the printed circuit board of the unit, so you must remove the ECU from the vehicle and open the box which protects the electronic board. Then you’ll have to read data stored inside the chip using an EPROM programmer; Alientech trades Galep in this regard.

In the case of reading using a serial tool, you need to find the diagnostic connector (OBD2) present inside the car to map before you can proceed with the reading of the original file.

Alientech has developed two serial programmers which perform the previews task:

  • Kess (generic serial programmer)
  • Powergate (specific serial programmer)

The last method of reading requires communicating with the microcontroller soldered to the printed circuit board of the unit; it is necessary to remove the ECU from the vehicle and open its box for connecting the device.

Alientech has developed the BDMpro which communicates directly with the microprocessor and can not only save the file that contains maps, but also other important data.

With BDMpro you can store Microcontrollers, Flash and EPROM data, to perform a complete ECU backup.

Part 2 – ECU information

After reading correctly the file stored into ECU memory, you must gather some information regarding the vehicle and the ECU. This information is:

  1. Manufacturer, model, displacement, and horsepower (or kWatt).
  2. ECU brand (Bosch, Siemens, Marelli, Delphi, Delco, etc.).
  3. ECU model (ME7, EDC16, etc.).
  4. Hardware version (e.g. Bosch 0281010134, the last three numbers, 134).
  5. Software version (e.g. Bosch 1037234501, the last three numbers, 501).

For points 1, 2 and 3 it is sufficient to read the vehicle manual or the codes printed on the ECU box; for points 4 and 5, sometimes the information is printed on the box, otherwise you must find them inside the file.

With the new ECM Titanium you don’t have to know all the ECU information because when you load a new file, the software automatically proceed to recognize it and also suggests you a list of Drivers that you can employ to speed up the editing process of maps.

If the suggested Driver files list is very long, you can use ECU information about ECU brand and model, to choose the most suitable ECM Driver.

Part 3 – Loading the original file in the ECM Titanium software

After plugging the ECM Titanium dongle in a USB port of your computer, you’ll have just to start the software; then you can recognize the following four panels in the main page of ECM


  • Original EPROM
  • Modified EPROM
  • DataBase
  • Selected driver

The button Browse placed in the Original EPROM panel, allows you to load the original files that you have read.

Once uploaded it, a copy will be automatically created and placed in the Modified EPROM panel,so that the copy is the one which your modifications will be applied.

If you have read the original file using an EPROM programmer, such as Galep, you must convert it depending on the ECU where the EPROM is soldered to.

The button Browse placed in the Modified EPROM panel, allows you to load a modified file if you’re already have a tuned one suitable for that ECU.

The DataBase panel contains information about all the files stored in USB dongle memory; the files that form the DataBase are Drivers, Originals and Modified those you recorded using the ECM Titanium software. The numbers next to Drivers, Originals and Modified are the amount of files those belong to each group which are stored inside USB dongle memory.

The panel Selected Driver, allows you to view the list of maps and limiters those are in the driver file loaded; opening the ECM Titanium software, the panel Selected Driver is empty because you have not selected any Driver files.

A Driver is a file developed by Alientech which contains all the known maps and limiters that you can employ to simplify the tuning process. In the Selected Drivers panel there is also the right number of the Checksum Families you have to posses to correct the checksum algorithm of the modified file.

Part 4 – Choosing the right Driver file

The new ECM Titanium recognizes the file loaded inside Original EPROM panel and automatically searches in the DataBase the compatible Drivers, and then the program shows a list of Drivers that can be chosen. If the proposed list is very long, you can use the information about ECU brand and model, to choose the most suitable ECM Driver.

It may happen that the suitable Driver for the ECU was not present among those in the ECM DataBase; in this case ECM Titanium will employ your Internet connection to find on Alientech online database the suitable driver.

During driver downloading from Internet, the following window will appear (Figure 6).

The window belongs to ECM Upgrade, the subsystem of Titanium ECM that manages the automatic updates.

It could happen that there weren’t drivers for the original file that you loaded, because it belongs to a too new vehicle or an ECU still under study; in these cases if you have subscribed the annual customer care with Alientech Srl, you can click the button Driver Request that appears in the window Search for a Driver in DB.

After selecting the suitable Driver, ECM Titanium returns to the main software window and it will shows the list of all the maps and the limiters contained in the selected drivers.

Part 5 – Choosing the right Checksum Family

Once you have selected the Driver for tuning the original file, the software will notify you if the ECM DataBase contains the Checksum family needed for signing the modified file. If you haven’t the right Checksum family software will shows the following message.

Checksum is the security algorithm with which are encoded files stored inside the engine control units; if the modified files you are tuning, it wasn’t signed with the correct Checksum algorithm, and the ECU will be blocked.

It is very important to know whether the device used for program the tuned file to the ECU already running CheckSum or not; some Alientech tools, as BDMpro and Powergate, are developed to calculate the CheckSum and you don’t need to buy the same Checksum family also for ECM Titanium.

If the previous message appeared (Figure 8), the software will return to the main window and the CheckSum Family box, in the Selected Driver panel, will be colored in red and will present the number of CheckSum Family to download.

To find out which CheckSum Families are in your ECM Titanium, you just go in the main software window, choose the menu Tools, choose Checksum, and then click on Available Checksum (Figure 10); a new window will open with the list of Available Checksum Families.

The available families that are stored on your USB dongle are colored green, while those in red are not present, but can be downloaded from the Internet (service fee).

For example, Figure 11 shows the 4, 5 and 85 families green, because stored in USB dongle memory, and the family 40 selected but colored red; to download the new Checksum, just click the button Download, at the lower right of the window Available CheckSum Families.

To download a new Checksum family from Internet, just click the box that appears next to the number of families using the mouse, and then click Download. This will open Internet Explorer to our website, so you have to enter your customer number (Cxxxx) and your password, then you just have to choose the number of CheckSum family you want to download (service fee); in the end a credit will be subtracted from your amount on the Alientech online database. Now that you have purchased the Checksum family, simply select it once again and click the button Download; at this point will appear the ECM Upgrade software window, which will show the progress of the download. Finally, the window Available CheckSum Families will show the new checksum family downloaded green, so immediately available to be used.


When the new CheckSum family you have downloaded is colored green, it means that now it is stored in the USB dongle database. We suggest you to download a new CheckSum family before begin tuning with a new original file.

Part 6 – Editing the original file to create a modified one

After loading a file and eventually selecting a Driver file, you will be ready to edit the original file using the new Titanium ECM software. First choose a window to view the values stored inside the file for editing; with ECM Titanium you can choose among:

  • 2D Graphics representation
  • Hexadecimal representation
  • Table representation
  • 3D Graphics representation

The 2D graphics representation allows both the expert and novice to see the curve representing the succession of values (hexadecimal or decimal) stored in a file.

The horizontal axis of the graph represents the address of the file (increasing from left to right), while the vertical axis the amplitude (height). Selecting a Driver, you will see that on the chart, the maps are already listed and are enclosed between two vertical segments.

With this graphic representation and some experience, you can recognize the maps according to the form they have in the chart.

It is possible to see a file represented in 2D graphics without the use of Driver.

The hexadecimal representation is useful to perform all those tasks (e.g. coding, region Checksum) and to compare two files (verification of differences in Byte).

Such numerical representation is more suited to advanced users.

In Figure 15, addresses of file are visible in vertical (increasing from top to bottom) and numbers written in the columns are the hex values (1-hexadecimal digit is 1 byte and can take decimal values from 0 to 255, in other words from 0x00 to 0xFF).

It is possible to see a file represented in hexadecimal without the use of Driver.

If you aren’t expert toner, we suggest you to employ ours Driver file to edit the original file.

With Drivers you can achieve two representations more to edit maps of original file:

  • Tabular representation: to view a map using table, depending on the control

parameters (e.g. RPM/Load, RPM/Pressure, etc.)

  • 3D Graphics representation: view a map using a 3 dimensions chart.

The Tabular representation is the fastest to edit a file, since avoid having to manually search the maps in the file; you can achieve it only if you use an Alientech support Driver.

The value written in every cell can found by crossing the two control parameters (e.g. RPM/Load, RPM/Pressure, etc.) that are written on the vertical and horizontal axis.

To work directly on a map in tabular representation, just go in the main window of ECM Titanium and select from the list of maps in the Selected Driver panel and then click the button

Open the selected map

The 3D Graphics representation is useful to see the shape of a map, so you can edit the original file looking at its structure in three dimensions.

The curve is drawn from the Table and thus can be used only by loading a Driver.

The height of a point on the curve (Z axis) is the value at the cross of the two control parameters (e.g. RPM / Load, RPM / pressure, etc.) that are written in the horizontal axis (X axis and Y axis).

The representation of maps in three dimensions is very useful as a final check for comparing the shape of the map with the original edited, and to verify if you have made mistakes during applying the increases (presence of “holes” or “peaks” in the curve of the modified file).

Now you can apply changes to the original file using one among the previous representations just described. When you have finished with a file it is sufficient to close the window and the ECM Titanium will ask automatically if you want to apply the increases to the modified file.

The software also will ask if you want to record the modified file in the database of USB dongle.

Part 7 – Concluding operations before writing

Before proceeding to write the modified file, you need to perform some concluding operations which depending on the device you are using and on ECU type.

The operation you can perform using the new ECM Titanium are:

Ecu editor free
  • Calculating CheckSum.
  • Encoding the modified file.

To correct the Checksum of modified file using the new ECM Titanium, you must have the Checksum Family for that particular ECU.

If you have one of the Alientech devices as BDMpro, Powergate and Kess you do not need to download the ECM Titanium Checksum Family because the calculation is automatically done by the tool.

Also the encoding of the edited file is not necessary if you use BDMpro, Powergate or Kess,but if it used an EPROM programmer (e.g. Galep) you must encode the file before you program it.

With ECM Titanium, calculating the checksum is done automatically if you use a Driver file of the USB dongle DataBase to support you during modification ECM and if you have also the Checksum family available.

Indeed, if you chosen the Driver support file for editing, the software will show the following window:

As you can see from Figure 20, the window shows the information that you need to do before and after editing a file; moreover, the previous figure advise you that if you use BDMpro, Powergate or Kess you don’t need to perform the concluding operations.

For example, if you use an EPROM programmer to read and write files in the ECU, you have to perform conversions to the original file (e.g. EDC16 – Decoding> BIN, Figure 20) before you modify and after program it (e.g. EDC16 – Encoding> E16, Figure 20).

If after viewing the window of Figure 20, will appear the following message (Figure 21):

means that you have not the right Checksum family used to sign the modified file for ECM Titanium.

If you want to download the Checksum family (service fee) read part “5 – Choosing the right Checksum Family”.

If you had not used any Driver to edit the original file, Figure 20 will not be shown and the software cannot recognize which Checksum family is employed to correct the file; in this case the CheckSum cannot be corrected automatically by ECM Titanium.

In the previous case, be sure that your device corrects the CheckSum before program the tuned file (BDMpro, Powergate and Kess automatically correct the Checksum).

If you don’t have the right Driver file, the right CheckSum Family of ECM Titanium and you are not sure that your programmer perform the CheckSum correction, we advise you against proceeding to program the ECU, because that could cause damages to it.

Part 8 – Writing modified file

The last step is to program the file modified (MOD) in memory of electronics. Just as with reading, writing files to ECU can be done in three ways:

  • By programming the memory chip (EPROM) and soldering it to ECU printed circuit board.
  • By connecting a tool for serial writing to the diagnosis connector (OBD2).
  • By connecting a tool for writing data to the microcontroller.
Ecu edit software

To avoid mistakes it is better to write the file in the same manner in which it was read, for example, if you read with a serial programmer, you’d better rewrite it in serial.

If you have unsolder EPROM from the board before resolder the integrated circuit, follow these tips:

  1. Remember the previous position of the EPROM before resolder it to the circuit.
  2. Check if contacts of the memory chip are clean and if they touch the copper surface of

ECU circuit, before close its box.

  1. Check after having soldered the EPROM if tin does not cause short circuits between the EPROM pins and other components laid and circuit board next to it.

If you’ve read the file with BDMpro, before program the modified file, follow these tips:

  1. Do not change the direction of the flat cable of BDMpro.
  2. If you are using the BDMpro adapters (circuits), verify if metallic probes make a good connection to ECU board.
  3. The BDMpro adapters (circuits) verify if metallic probes don’t make contact themselves.
  4. If you soldered two strips on ECU circuit printed board, remember to remove them

Ecu Map Editor Software Free

before closing the ECU box.

If you read the original file using a serial programmer (Kess or Powergate), please follow these tips before programming the tuned file:

Ecu Flash Software

  1. Check if battery is sufficient, because programming could be interrupted by the ECU if the voltage was too low.
  2. Do not remove the OBD plug during programming process by any means.

If you will follow all the instructions and tips written in this document, you will avoid damages to ECUs.

(Visited 341 times, 5 visits today)

EcuBooster is an universal editor for ECU tuning. Powerful and convenient tool for editing ECU maps and parameters.

Auto-detecting type of bin-file. EcuBooster editor automatically detects a type of ECU when you open a bin file. And loads editable maps and options.

Harmony for Studios and Large Teams From the biggest and brightest to small studios with impressive pedigrees and ambitious designs, studios who produce everything from movies to advertisements use the software that makes the animation world turn. Toon Boom Harmony 12 Premium 12.0.0 Mac Torrent Crack Free Download. Toon boom harmony 12 premium v12.0.0 macosx Toon Boom Harmony 12.1 Release Notes. Version 12.1 Here are the new features, changes, improvements, and bug fixes in Toon Boom Harmony 12.1. Toon Boom Harmony Premium v12.2 (x64) torrent download - Limit my search to u/Foreign-Ear-8550. Use the following search parameters to narrow your results: subreddit:subreddit find submissions in 'subreddit'. Toon Boom Harmony Premium 20.0.3 Build 16743 Win / 12.1.1 macOS. Hackintosh macOS Niresh Big Sur Intel / AMD.

Activation of licenses directly in the application. You open a bin file, the software recognizes a type of ECU and provides a full bin-file description and available licenses options as well. Just click 'Activate' and you immediately may start work. Fast and convenient.

Credits. Every user can put credits in advance to his account at EcuBooster. When you need to add a new ECU just activate a license right from the application. Cost of the license will be charged from the account. Thus, you get instant access to any licenses.

Customization working area of ​​the program. The project file remembers the type, location and size of windows, all maps. Changing map view between table / 2D / table + 2D.

Versions. When you open a bin file, a new project is created. The project always retains the original stock file. The stock file is located at the root of the version tree and you can return to the stock file whenever you want. Any change will create a new version (tune), no limitations how many versions to create. From any tune you can export to bin for ECU flash.

Automatic software update. You do not need to follow updates and always have the latest software version. Just turn on the internet. We are constantly working to improve our product.

Demo license. Available for different types of ECUs with full functionality without the ability to export bin-file for ECU flash. Try it now, it's free! Download.

We add mappacks on request. For ECU types that are not in our database. Just send us a bin file and within 24 hours the mappack will be added to EcuBooster support. It's free.

Ecu Map Editor Software

Full user support. We answer your questions - online chat, forum, social networks and messengers - list. Choose convenient way for you.

We are blogging. Where we share the tricks of tuning different vehicles based on own dyno tuning experience with the EcuBooster editor. Subscribe to the news, it will be interesting! As well we support publics in social networks - the list here.

Ecu map editor software free

Only original! We do sell original only equipment.

How does the EcuBooster editor work?

Ecu Edit Software

To work with ECU maps, the system uses the file definition. This is a set of map descriptions and parameters, structured for easy viewing and editing. Each definition includes a set of basic maps used for tuning. Ignition, fuel injection, phase shifters, torque model, detonation control maps, choke, cut-off, VTEC operation points, limiters, idling, selective shutdown of DTC errors and systems like EGR, VCM, DPF, etc. One definition is one type of ECU.

Ecu Map Editor Software Update

Getting started with the program.

To work with the EcuBooster editor, you need to purchase a hardware USB dongle , which contains a unique ID. The account is tied to the user ID. Fullfilling an account, user gets the opportunity to activate the license.


Single license allows you to work with a bin file of the same ECU type. A single license will be convenient for enthusiasts who tune their personal car. This license is the most affordable.

Pack license a family of single licenses. Pack license will be useful to professionals, as it allows you to access one or several ECU types at once. Finally, it is cheaper than a lot of single licenses.

Licenses for Hondaare here.
Licenses for Nissanare here.
Licenses for Toyota petrolare here.
Licenses for Toyota dieselare here.
Licenses for Infinitiare here.
Licenses for Acuraare here.

If license for your ECU is not in our database, but it is possible to add it. Send us a stock bin file, we will add a license within 24 hours. We are constantly working on updating the license database.

How do I know if my ECU is supported? Very simple. Run the editor, open your bin file stock. The system starts an automatic search. If the definition is found, you will see a window with a description of the ECU bin file. This feature works for free and without a USB key. Just install the editor and use.

The article below is for those who want to make ECU tuning, but do not know how to start.